As automotive electronic equipment becomes increasingly sophisticated, the increased power consumption and operating temperature of audio systems have become common problems. Insufficient heat dissipation not only affects the stability of sound quality, but may also shorten the life of the equipment. Xingdong DC axial flow fan 2010 is designed specifically for vehicle-mounted scenarios. With its efficient heat dissipation, low power consumption and durability, it has become the preferred solution in the field of automotive audio heat dissipation.

1. Core advantages of Xingdong DC axial flow fan 2010 products

High efficiency and energy saving:
Optimize the energy consumption ratio, maintain efficient operation at low speed, support PWM speed regulation function, and dynamically adjust the air volume according to demand to reduce power consumption.

Strong wind power:
The high speed design is up to 18000RPM, the air volume reaches 1.89CFM, and the air pressure is 7.23mmH2O. The supercharged structure enhances the airflow penetration, which is suitable for high-load scenarios such as industrial heat dissipation and equipment cooling.

Noise reduction and silence:
Through the fluid mechanics impeller design, the operating noise is controlled below 37.3dBA, taking into account both silence and heat dissipation efficiency.

Pure copper motor:
The motor uses pure copper coils, which have excellent conductivity, reduce energy loss, improve durability, support long-term continuous operation, and have better stability than ordinary aluminum wire motors.

Easy to install:
It provides size specifications that are suitable for a variety of devices (such as 20×20×10mm design), supports IP68 waterproof level selection, is compatible with industrial computers, chassis, new energy equipment and other scenarios, and has standardized installation interfaces.

Durable
The bearing life is up to 80,000 hours, the temperature range is -10℃~+70℃ (working) -40℃～+70℃ (storage), and it uses PBT 94V-0 material, which is impact-resistant, flame-retardant, and adaptable to complex environments.

(This data is only for general parameters, all products can be customized according to customer needs)

2. Xingdong DC Axial Fan 2010 Product Design

Xingdong DC Axial Fan 2010 is specially designed for the heat dissipation needs of car audio. It deeply integrates functionality, adaptability and durability in product design, and provides reliable protection for car audio from multiple dimensions.

Compact and exquisite appearance design:
The size of 20×20×10mm is adopted. This exquisite design is based on the in-depth research on the internal space layout of car audio. The internal structure of car audio is compact, and various electronic components and circuit boards are densely arranged. With its compact body, Xingdong DC axial flow fan 2010 can be flexibly installed in the narrow space inside the audio equipment. Whether it is an embedded audio or an independent audio module, it can be easily adapted without taking up too much space, ensuring perfect compatibility with the original structure of the audio, and facilitating later installation and maintenance.

Aerodynamic design for efficient heat dissipation:

Fan blade structure: The carefully designed fan blade adopts a special curvature and angle, which can effectively reduce air resistance and increase air flow and flow rate when the fan is running. When the DC motor drives the fan blade to rotate at high speed, a strong axial airflow is quickly formed, which directly acts on the surface of the heating element inside the audio, realizing efficient forced convection heat dissipation, quickly taking away heat, reducing the internal temperature of the audio, and ensuring that the core components operate stably at an appropriate temperature.

Air duct optimization: The air duct design of the fan housing has also been precisely calculated. Its internal guide structure can guide the airflow to be evenly distributed, avoid energy loss caused by airflow turbulence, further improve heat dissipation efficiency, and ensure that the heat of the entire audio system can be discharged quickly and smoothly.

Reliable and stable circuit and function design:
Power adapter: The working voltage is set to the common 12V, which is naturally adapted to the automotive circuit system. No additional power conversion device is required, which reduces the complexity of circuit connection, reduces the risk of failure, and ensures that the fan can operate stably in the automotive circuit environment.

3. Why choose Xingdong DC axial flow fan 2010?

Solve the pain points of traditional heat dissipation:
Traditional fans have problems such as high noise, high energy consumption, and short life. Xingdong products have achieved triple breakthroughs of "silent, energy-saving, and durable" through technological innovation.

Improve user experience:
Low noise design avoids interference with music playback, precise heat dissipation ensures stable sound quality, extends the service life of the equipment, and reduces maintenance costs.

Adapt to industry needs:
The automotive audio market has a growing demand for miniaturized and intelligent heat dissipation solutions, and this product accurately matches the stringent requirements of vehicle-mounted scenarios.

In the field of car audio that pursues the ultimate sound effect, heat dissipation capacity is the key to equipment reliability. Xingdong DC axial flow fan 2010 uses technology as an anchor point to balance performance, energy efficiency and durability, and provide "cool" support for vehicle electronic systems. Whether it is daily commuting or long-distance travel, it is a silent partner to protect sound quality and safety.

Due to the strong adaptability of the performance and working voltage (such as 5/12V) of DC axial flow cooling fans, it is suitable for various electronic devices (such as: power supplies, smart home appliances, racks, cabinets and various industrial equipment). When choosing a fan, we will recommend customers to choose the appropriate model and specification based on the equipment's heat dissipation requirements, space restrictions and the fan's silent requirements.

In order to adapt to the future development trend of high intelligence and high automation in the manufacturing industry, Xingdong has introduced a number of intelligent automated production lines. There are many advantages to using automated equipment to produce DC axial flow cooling fans, mainly including the following points:

1. Improve production efficiency: Automated equipment can significantly improve the efficiency of fan production and shorten the production cycle.

2. Consistency of product quality: Automated equipment can ensure the consistency and stability of products and reduce human errors and irregular operations. From raw material processing to assembly, each step of automation can be precisely controlled to ensure that the performance and quality of each fan meet the set standards.

3. Reduce production costs: Although the initial investment is high, automated equipment can reduce labor costs and production consumables in the long term, and reduce waste caused by manual operation. Automation can also improve material utilization and reduce defective rates.

4. Improve production flexibility: Automated equipment can be quickly adjusted according to the needs of different cooling fans, enabling companies to respond to market changes more quickly and launch new products.

5. Improve working environment and safety: The automated production process reduces the opportunity for workers to be exposed to potentially hazardous environments, and can usually reduce working environment pollution such as noise and dust.

6. Achieve standardized production: Through automation, companies can more easily follow industry standards and regulations, ensure that products meet relevant safety and performance standards, and enhance competitiveness.

2-20 cm can be customized to meet customers' different installation sizes and different heat dissipation requirements. Xingdong Electronics has a variety of fan sizes to choose from. While ensuring large air volume and meeting the internal heat dissipation conditions of the equipment, it uses high-quality driver chips to reduce the power consumption and noise of the fan.

Choosing Xingdong Electronics means choosing a more professional and reliable cooling partner.